License Plat Sign - Waving Checkered Racing Flag

posted by pbwethy @ 12:00 PM
August 25, 2010

Racing flags are traditionally used in auto racing and similar motorsports to indicate track condition and to communicate important messages to drivers. Typically, the starter, sometimes the grand marshal of a race, waves the flags atop a flag stand near the start/finish line. On road courses, track marshals are also stationed at observation posts along the course in order to communicate both local and course-wide conditions to drivers. Alternatively, some racecourses employ lights to supplement the primary flag at the start/finish line.

This checker flag license plate makes a great gift for any racing fan.


add comment | Comments (0)...

License Plate Tag - Niagara Falls

posted by pbwethy @ 12:00 PM
July 9, 2010

I thought it would be nice to give my blog readers a little facts about Niagara Falls. This license plate tag would make a great picture for a wall or to place on your car.

 

NIAGARA FALLS FACTS
American Falls
•Height 180 ft (56 m)
•Width 1060 ft (320 m)
•Volume of flow 10% of total
Horseshoe Falls
•Height 170 ft (54m) Width 2200 ft (675m)
•Volume of flow 90% of total
•Total Flow Over Niagara Falls
•April 1 - Sept 15:
◦100,000 cu ft/sec (2830 cu m/sec) (8am-10pm)
•Sept. 16 - Oct. 31:
◦100,000 cu ft/sec (2830 cu m/sec) (8am-8pm)
•All other times:
◦50,000 cu ft/sec (1415 cu m/sec)
Total Average Flow of Niagara River:
•202,000 cu ft/sec (5720 cu m/sec)
(before diversion for electricity)


add comment | Comments (0)...

License Plate Tag - Windmills

posted by pbwethy @ 12:00 PM
July 8, 2010

A windmill is a machine which converts the energy of wind to rotational motion by means of adjustable vanes called sails. The main use is for a grinding mill powered by the wind, reducing a solid or coarse substance into pulp or minute grains, by crushing, grinding, or pressing. Windmills have also provided energy to sawmills, paper mills, hammermills, and windpumps for obtaining fresh water from underground or for drainage (especially of land below sea level).

You can also use this license plate tag as picture on a wall or place in on your car.


add comment | Comments (0)...

License Plate Tag - Veteran of Vietnam War

posted by pbwethy @ 12:00 PM
July 6, 2010

The Vietnam War  was a Cold War military conflict that occurred in Vietnam, Laos, and Cambodia from November 1, 1955, to April 30, 1975 when Saigon fell. This war followed the First Indochina War and was fought between the communist North Vietnam, supported by its communist allies, and the government of South Vietnam, supported by the United States and other anti-communist nations.

The Viet Cong, a lightly-armed South Vietnamese communist-controlled common front, largely fought a guerrilla war against anti-communist forces in the region. The North Vietnamese Army engaged in a more conventional war, at times committing large units into battle. U.S. and South Vietnamese forces relied on air superiority and overwhelming firepower to conduct search and destroy operations, involving ground forces, artillery and airstrikes.

The United States entered the war to prevent a communist takeover of South Vietnam as part of their wider strategy of containment. Military advisors arrived beginning in 1950. U.S. involvement escalated in the early 1960s, with U.S. troop levels tripling in 1961 and tripling again in 1962. U.S. combat units were deployed beginning in 1965. Operations spanned borders, with Laos and Cambodia heavily bombed. Involvement peaked in 1968 at the time of the Tet Offensive. After this, U.S. ground forces were withdrawn as part of a policy called Vietnamization. Despite the Paris Peace Accords, signed by all parties in January 1973, fighting continued.

The Case-Church Amendment passed by the U.S. Congress prohibited use of American military after August 15, 1973 unless the president secured congressional approval in advance. The capture of Saigon by the North Vietnamese army in April 1975 marked the end of the Vietnam War. North and South Vietnam were reunified the following year.

The war exacted a huge human cost in terms of fatalities , including 3 to 4 million Vietnamese from both sides, 1.5 to 2 million Laotians and Cambodians, and 58,159 U.S. soldiers.

This license plate tag you can remember are veterans.


add comment | Comments (0)...

License Plate Tag - Bronc Riding

posted by pbwethy @ 12:00 PM
April 14, 2010

Bronc riding, either saddle bronc or bareback bronc competition, is a rodeo event that involves a rodeo participant riding on a horse (sometimes called a bronc or bronco), that attempts to throw or buck off the rider. Originally based on the necessary horse breaking skills of a working cowboy, the event is now a highly stylized competition that utilizes horses that often are specially bred for strength, agility, and bucking ability. The event has provoked concerns among some animal welfare advocates that some of the practices used in the event may constitute animal cruelty.

Each competitor climbs onto a horse, which is held in a small pipe enclosure called a bucking chute. When the rider is ready, the gate of the bucking chute is opened and the horse bursts out and begins to buck. The rider attempts to stay on the horse for eight seconds without touching the horse with his free hand. On the first jump out of the chute, the rider must “mark the horse out.” This means he must have the heels of his boots in contact with the horse above the point of the shoulders before the horse’s front legs hit the ground. The rider that manages to complete a ride is scored on a scale of 0-50 and the horse is also scored on a scale of 0-50. Scores in the 80s are very good, and in the 90s, are exceptional. A horse who bucks in a spectacular and effective manner will score more points than a horse who bucks in a straight line with no significant changes of direction.

Saddle bronc and bareback bronc styles are very different. In saddle bronc the rider uses a specialized saddle with free swinging stirrups and no horn. The saddle bronc rider grips a simple rein braided from cotton or polyester and attached to a leather halter worn by the horse. The rider lifts on the rein and attempts to find a rhythm with the animal by spurring forwards and backwards with his feet.

The bareback bronc rider does not use a saddle or rein, but uses one hand to grip a simple handle on a surcingle style rigging placed on the horse just at the horse’s withers. The rider leans back against the bucking horse and spurs up and down motion with his legs, again in rhythm with the motion of the horse.

This Bronc license plate tag makes a great gift.


add comment | Comments (0)...

License Plate Tag - Bull Rider

posted by pbwethy @ 12:00 PM
April 13, 2010

Bull riding is a rodeo sport that involves a rider getting on a large bull and attempting to stay mounted for at least eight seconds while the animal attempts to buck off the rider. The rider tightly fastens one hand to the bull with a long braided rope. It is a risky sport and has been called “the most dangerous eight seconds in sports.”
Informal rodeos began as competitions between neighboring ranches in the American Old West and the location of the first formal Rodeo is a debated. Deer Trail, Colorado claims the first rodeo in 1869 but so does Cheyenne, WY in 1872.
A pivotal moment for modern bull riding, and rodeo in general, came with the founding of the Rodeo Cowboy Association (RCA) which later became the Professional Rodeo Cowboys Association (PRCA). Through this organization many hundreds of rodeos are held each year. Since that time, the popularity of all aspects of the rodeo has risen. In 1994 a separate organization was formed for bull riding alone: The Professional Bull Riders (PBR), which stages a large number of events including the annual PBR World Finals held at the Thomas and Mack Center in Las Vegas, Nevada.
Most professional bull riders start out riding in high school NHSRA and or junior associations. There are several semi-pro associations including the Southern States Bull Riding Association (SSBR),the North American Bull Riding Association (NABA), the International Bull Riders Association (IBR)and the Professional Championship Bull Riding Tour (PCB) The top bull riders from these associations are eligible to participate in the National Bull Riders Series Finals (NBR). The NBR bulls are provided by the Professional Bucking Bull Association (PBBA).Bull riders compete at these events as they are climbing the ladder to the PBR and CBR and to supplement their income.

This license plate tag makes a great gift.


add comment | Comments (0)...

License Plate Tag - Scuba Divers Dive Flag

posted by pbwethy @ 12:00 PM
March 30, 2010

A diver down flag, or scuba flag, is a flag used to indicate that there is a diver below. It is red with a white stripe from the upper left corner to the lower right corner. It can be placed on a boat or on a surface marker buoy. (Practice about this choice of flag is not uniform worldwide. In some countries, the practice is to use the blue-and-white A-flag – see below Signal flag ALFA/ALPHA – instead.)

It is used to notify to any boats to steer clear for the safety of the diver.

The use of this flag is required by law or regulation in many US states and Canada, as well in several other countries in the world (eg. Italy).Usually the regulations require divers to display the flag and to stay within a specified distance of it when they are near the surface. As well there is often a larger zone around the flag where no boats are allowed to pass. Some states also prohibit the display of this flag when there is no diver in water.

 Other uses
Today the red and white flag is so strictly associated with scuba diving that it is also used to indicate a place where there are services for divers, for example stores selling or renting diving equipment or scuba service stations. It may be seen on the windows or bumpers of cars belonging to divers.

This scuba divers dive flag license plate tag makes a great gift.


add comment | Comments (0)...